Residential Roofing in Burbank, CA

Burbank Roofing is a free referral service for homeowners. You describe what is happening with your roof, and we pass your request to one independent local roofing contractor who works in Burbank and nearby. That contractor inspects the roof, explains your options, and gives you a written estimate. We do not do roofing work ourselves, and we never charge homeowners.

Last updated October 22, 2026.

What kinds of roofs are on Burbank homes?

Burbank grew quickly between the 1920s and the 1950s, and a lot of the housing stock still dates from that period. Walk through Magnolia Park, the Rancho area, or the streets between Glenoaks Boulevard and the freeway and you will see Spanish Colonial Revival houses with clay tile, small Minimal Traditional homes and postwar ranch houses with composition shingles, and plenty of low-slope roofs over garages, porches, and additions. Later decades added condos, apartment buildings, and infill homes, and today many lots are adding accessory dwelling units (ADUs) with roofs of their own.

That mix matters, because the right repair or replacement depends on what is on the roof now and what is underneath it. An older home may have shingles laid over spaced boards (skip sheathing) that needs new plywood before a modern roof can go on. A tile roof may have perfectly good tiles sitting on underlayment that has reached the end of its life. A flat roof over a 1950s den may have been patched so many times that a new membrane is the only lasting fix.

Which residential roofing service do you need?

Roof repair: leaks, broken tiles, lifted shingles, failed flashing, cracked vent boots, and worn spots on flat sections.
Roof replacement: a full tear-off and new roof when the existing one is near the end of its life or leaking in several places.
Roof installation: new roofs on additions, ADUs, garage conversions, and new homes.
Shingle roofing: asphalt shingle repairs and re-roofs, including Class A fire-rated options.

Not sure which one fits? A roof inspection is a good starting point. Clay or concrete tile homes can also look at our tile roofing page.

Local conditions that affect Burbank roofs

Burbank sits at the east end of the San Fernando Valley, below the Verdugo Mountains. Summers are long and hot, and strong sun dries out shingles, sealants, and the rubber boots around plumbing vents faster than in milder coastal areas. Santa Ana winds in fall and winter can lift shingles and shift tiles, often right before the first rain. Winter storms then find whatever the wind loosened.

Fire is the other big factor. Many hillside areas of Burbank and the surrounding foothills are mapped as Very High Fire Hazard Severity Zones. In those areas a Class A fire-rated roof assembly is typically required on a re-roof, and details like ember-resistant vents and closed tile ends (bird stops) are worth discussing. You can check your address on the CAL FIRE hazard map or ask the City of Burbank.

Permits and older-home details

Re-roofing in Burbank generally requires a permit from the City of Burbank’s Building & Safety Division, and the contractor usually pulls it and schedules inspections. Homes outside the city limits go through their own jurisdiction, such as the City of Los Angeles or the City of Glendale. On a re-roof, California’s energy code (Title 24) cool-roof rules may apply depending on the roof’s slope and climate zone, so ask your contractor which products qualify.

Homes built before 1978 may have lead paint on fascia boards and eaves, which calls for lead-safe work practices. Some older roofing felts, mastics, and flashing cements contained asbestos, so it is reasonable to ask whether testing makes sense before a tear-off.

Before you hire a roofer

Check the contractor’s license on the CSLB website (cslb.ca.gov). Roofing work is usually done under a C-39 roofing classification or a general building license.
Ask for proof of liability insurance and workers’ compensation coverage.
Get a written estimate that lists materials, underlayment, flashing, ventilation, tear-off, disposal, the permit, and how extra repairs (like rotted decking) will be priced.
In California, the down payment on most home improvement contracts can’t exceed 10% of the price or $1,000, whichever is less, and many contracts come with a three-business-day right to cancel.

Home roofing services

Roof Repair

Leaks, broken tiles, lifted shingles, flashing, and vent boots fixed before they spread.

Roof Replacement

Full tear-off and re-roof with permits, new underlayment, flashing, and fire-rated materials.

Roof Installation

New roofs for ADUs, garage conversions, room additions, and new homes in and around Burbank.

Shingle Roofing

Asphalt shingle repairs and re-roofs, including Class A and cool-rated shingle options.

Residential Roofing help near Burbank

We take requests from Burbank and these nearby communities:

Frequently asked questions

Do you do the roofing work yourselves?

No. Burbank Roofing is a free referral service. We connect you with one independent local roofing contractor, and that business is responsible for its own license, permits, insurance, estimate, and workmanship.

How do I know if I need a repair or a whole new roof?

If damage is limited to one area and the rest of the roof has life left, a repair often makes sense. Leaks in several places, brittle or bare shingles across the roof, or failed underlayment under tile usually point toward replacement. An inspection is the reliable way to know.

Do I need a permit to re-roof in Burbank?

In most cases, yes. A re-roof in Burbank generally needs a permit from the City of Burbank Building & Safety Division. Your contractor normally applies for it and schedules the inspections.

Is my home in a fire hazard zone?

Many hillside areas of Burbank are mapped as Very High Fire Hazard Severity Zones. Check your address on the CAL FIRE map or ask the city. If you are in a mapped zone, a Class A roof assembly is typically required on a re-roof.

Back to Burbank Roofing